Baby carriage/crib test

With the improvement of living standards, the market demand for strollers and cribs is increasing. Since these products are mainly used for infants and young children with low behavioral ability, their safety has attracted much attention. Many countries have classified the nature of the use of such products, and have formulated targeted standards for safety control.

Baby carriage safety test

(1) China GB14747
This standard applies to children's tricycles for one child or more children.
1.1 Material
1.2 Mechanical strength
1.3 Sharp edges, sharp tips, exposed protrusions, pinch points and small parts
1.4 Stability
1.5 parts
1.6 Product mark and instructions for use

(2) China—GB 14749
This standard applies to baby walkers used by infants who can sit and walk on their own.
1.1 Material
1.2 Anti-corrosion of metal surface
1.3 Structure
1.4 Static and dynamic stability
1.5 Static and dynamic strength
1.6 Plastic bags or plastic films used for packaging or walkers
1.7 Signs and instructions for use

(3) China—GB 14748
This standard applies to children's wheeled strollers for one child or multiple children.
1.1 Material
1.2 Anti-corrosion on metal surface
1.3 Structure
1.4 Basic size
1.5 Applicable age for carts
1.6 The device for connecting the sleeping pocket and the seat pocket to the frame
1.7 Stability
1.8 Handle strength
1.9 Braking device
1.10 Folding mechanism locking device
1.11 Strength and durability of the connecting device of the detachable sleeping pocket or seat pocket
1.12 Restraint system
1.13 The strength of the wheel
1.14 Dynamic durability test
1.15 Impact strength
1.16 Static strength
1.17 Plastic packaging bags and soft plastic films
1.18 Product mark and instructions for use

(4) United States—ASTM F977
This standard applies to baby walkers used by infants.
1.1 Locking device
1.2 holes
1.3 Clipping point
1.4 exposed spring
1.5 Protective parts
1.6 Attached toys
1.7 Stability
1.8 Structural integrity
1.9 Protective device to prevent falling steps
1.10 Signs and labels
1.11 Manual

(5) United States—ASTM F833
This standard applies to wheeled strollers for carrying infants or children.
1.1 Sharp points, sharp edges, small parts, burrs and sawdust on wood
1.2 Locking device
1.3 Opening
1.4 Clipping point
1.5 exposed spring
1.6 tags
1.7 Protector
1.8 Seat back angle measurement
1.9 Brake device
1.10 Toys
1.11 Static load
1.12 Stability
1.13 Restraint system
1.14 Passenger space protection
1.15 Combined configuration of car seat and cart
1.16 Impact test
1.17 Can pass through openings in the body or feet
1.18 Signs and labels
1.19 Explanatory materials

(6) European Union—EN 1273/BS EN1273
This standard applies to baby walkers used by infants who can sit and walk on their own.
1.1 Opening
1.2 Edges, corners and protrusions
1.3 Small objects
1.4 Decal
1.5 Ropes, straps and parts used for tying
1.6 Hard moving parts
1.7 Seat
1.8 Folding mechanism and frame adjustment device
1.9 Static stability
1.10 Protective device to prevent falling steps
1.11 Dynamic stability
1.12 Intensity
1.13 Parking device
1.14 Durability of decals and labels
1.15 Product information materials
1.16 Packaging

(7) European Union—EN 1888
This standard applies to children's wheeled strollers for one child or multiple children.
1.1 Structure
1.2 Stability
1.3 Reversible cart
1.4 Handle
1.5 parking device and brake device
1.6 Locking device of folding mechanism
1.7 Longitudinal stability of lying pockets with handles
1.8 The connection point between the handle/handle and the lying pocket/removable seat pocket
1.9 Strength and durability of the connecting device of the detachable sleeping pocket or seat pocket
1.10 Restraint system
1.11 Wheel strength
1.12 Irregular surface test
1.13 Durability of labels
1.14 Plastic packaging
1.15 Product Information

(8) Australia/New Zealand—AS/NZS 2088
This standard applies to wheeled strollers for carrying infants or children.
1.1 size
1.2 Material
1.3 Parts in contact with children's head
1.4 Pipe end opening
1.5 Reversible handle
1.6 Foot parts
1.7 Removable parts
1.8 parking device
1.9 Locking device
1.10 Seat space protection
1.11 Seat and backrest surface
1.12 Durability
1.13 protrusions
1.14 Dangerous Edge
1.15 Dangerous tip
1.16 Stability
1.17 Wheel safety
1.18 The safety of the reversible handle connection point
1.19 Security of the locking device
1.20 Packaging and information labels
1.21 logo

Crib safety test

(1) The United States—CPSC 16CFR 1508
This standard applies to full-size cribs for infants.
1.1 size
1.2 Component clearance
1.3 Hard parts
1.4 Structure and finished product
1.5 Assembly instructions
1.6 Identifyable signs, warnings and compliance statements
1.7 Record keeping
1.8 Irregular clearance requirements

(2) The United States—CPSC 16CFR 1509
This standard applies to non-full-size cribs designed for babies to sleep in and outside the home, travel and other situations.
1.1 size
1.2 Height of bedside fence
1.3 Component clearance
1.4 Hard parts
1.5 Structure and finished product
1.6 Mattress
1.7 Assembly instructions
1.8 Identifyable signs, warnings and compliance statements
1.9 Record keeping
1.10 Irregular clearance requirements

(3) United States—ASTM F1169
This standard applies to full-size cribs designed for babies to sleep at home.
1.1 Burrs and sawdust on wood
1.2 Component clearance
1.3 Hard parts
1.4 Structure and finished product
1.5 Assembly instructions
1.6 Identifyable signs, warnings and compliance statements
1.7 Record keeping
1.8 Irregular clearance requirements

(4) United States—ASTM F1821
This standard applies to cribs for children under 15 months who weigh no more than 50 lb (27.7 kg) and can use a full-size crib mattress.
1.1 Sharp points, sharp edges, small parts, burrs and sawdust on wood
1.2 Cut the pinch point
1.3 Protective parts
1.4 opening
1.5 tags
1.6 Corner post extension
1.7 Mattress reservation
1.8 Mattress support system
1.9 Mattress support system connected to the end of the frame
1.10 Guardrail
1.11 Frame end
1.12 The opening formed by part of the frame
1.13 Signs and labels
1.14 Explanatory materials

(5) United States—ASTM F2194
This standard applies to cradles for infants. This type of cradle is usually supported by free legs, a bottom with wheels, a bottom that can swing, or a bottom that can swing to support a stable bottom surface.
1.1 Sharp points, sharp edges, small parts, burrs and sawdust on wood
1.2 Cut the pinch point
1.3 Accidental folding
1.4 Hole
1.5 tags
1.6 Fasteners
1.7 corner posts
1.8 Toys
1.9 The gap of the cradle rigid fence
1.10 Openings in cradle mesh or textile fence
1.11 Static load
1.12 Stability
1.13 Mattress
1.14 Protective parts
1.15 Signs and labels
1.16 Explanatory materials

(6) United States—ASTM F406
This standard applies to non-full-size cribs and playpens. This type of product is designed for children with a height of less than 35 in. (890 mm) for playing and sleeping.
1.1 Corner post
1.2 Sharp points, sharp edges, small parts, burrs and sawdust on wood
1.3 Clipping point
1.4 Toys
1.5 Locking mechanism
1.6 Hole
1.7 Protector
1.8 Label
1.9 Stability
1.10 Length of rope and strap
1.11 spring
1.12 The trapped gap in the attachment
1.13 Mattress
1.14 protrusions
1.15 Performance requirements for rigid material fences
1.16 Performance requirements for mesh or textile fences
1.17 Signs and labels
1.18 Explanatory materials

(7) European Union—EN 1130
This standard applies to cribs and cradles with an internal length of no more than 900mm that are used indoors. This kind of crib and cradle is provided for the baby to use while sleeping, until the baby can sit up, kneel up, or support it by hand.
1.1 Material
1.2 Structure
1.3 Bed bottom
1.4 Sides and ends
1.5 Stability
1.6 Packaging
1.7 Instructions for use
1.8 logo

(8) United Kingdom—BS EN716
This standard applies to cribs with an internal length greater than 900mm but not greater than 1400mm used indoors.
1.1 Edges and protrusions
1.2 Self-tapping screws
1.3 Labels and decals
1.4 Small objects
1.5 Casters and wheels
1.6 Holes, gaps and openings on the side of the bed
1.7 The structure on the outside of the crib that may clamp the head
1.8 Clipping point
1.9 Support point
1.10 Locking system
1.11 Bed bottom
1.12 Side and end
1.13 Bed frame
1.14 Stability
1.15 Mattress size
1.16 Packaging
1.17 Instructions for use
1.18 logo