Paint inspection

In 2015, the state issued the "Caishui [2015] No. 16 of the Ministry of Finance and the State Administration of Taxation on the

Notice on Collection of Consumption Tax: Consumption tax will be levied on batteries and paint since February 1, 2015, and the applicable tax

The rate is 4%; since January 1, 2016, a consumption tax will be levied on lead-acid batteries at a rate of 4%. On construction status

Coatings with a volatile organic compound (VOC) content of less than 420 g/l (inclusive) are exempt from consumption tax.

Conventional testing items and standards for coatings:

1 GB/T 1720-1979 (1989) Determination of paint film adhesion

2 GB/T 1721-2008 Determination of appearance and transparency of varnishes, varnishes and thinners

3 GB/T 1722-1992 Varnish, varnish and thinner color determination method

4 GB/T 1723-1993 paint viscosity determination method

5 GB/T 1724-1979 (1989) Determination of paint fineness

6 GB/T1725-2007 Determination of non-volatile content in paints, varnishes and plastics

7 GB/T 1726-1979 (1989) Determination of hiding power of paint

8 GB/T 1727-1992 paint film general preparation method

9 GB/T 1728-1979 (1989) Determination of drying time of paint film and putty film

10 GB/T 1730-2007 Paint and varnish pendulum damping test

11 GB/T 1731-1993 Determination of flexibility of paint film

12 GB/T 1732-1993 Determination of impact resistance of paint film

13 GB/T 1733-1993 Determination of water resistance of paint film

14 GB/T 1735-1979 (1989) Determination of heat resistance of paint film

15 GB/T 1740-2007 Determination of resistance to humidity and heat of paint film

16 GB/T 1741-2007 Test method for mold resistance of paint film

17 GB/T 1747.2-2008

Paints and varnishes. Determination of pigment content. Part 2: Ashing

law

18 GB/T 1748-1979 (1989) Test method for flexibility of putty film

19 GB/T 1749-1979 (1989) Thick paint and putty consistency determination method

20 GB/T 1762-1980 (1989) Determination of paint film stickiness

21 GB/T 1765-1979 (1989) Determination of damp heat resistance, salt spray resistance, weather resistance (artificial acceleration) paint

Membrane preparation method

22 GB/T 1766-2008 Paint and varnish coating aging rating method

23 GB/T 1768-2006 Determination of abrasion resistance of paint film

24 GB/T 1770-2008 Coating film, putty film sandability test method

25 GB/T 1771-2007 Determination of neutral salt spray resistance of paints and varnishes

26 GB/T 1865-1997

Paint and varnish artificial weathering and artificial radiation exposure (filter

Xenon arc radiation)

27 GB/T 3181-2008 Paint Film Color Standard

28 GB/T 3186-2006 Sampling of paint products

29 GB/T 4893.3-2005 Determination of resistance to dry heat of paint film on furniture surface

30 GB/T 4957-2003

Measuring vortex of non-conductive coating thickness on non-magnetic metal substrate

Stream method

31 GB/T 5208-2008 Determination of Flash Point Fast Balanced Closed Cup Method

32 GB/T 5209-1985 Determination of water resistance of paints and varnishes by immersion method

33 GB/T 5210-2006 Coating adhesion determination method Pull open method

34 GB/T 6739-2006 Pencil Method for Measuring Hardness of Coating Film

35 GB/T 6040-2002 General Rules of Infrared Spectroscopy Analysis Method

36 GB/T 6041-2002 General Rules of Mass Spectrometry Analysis Methods

37 GB/T 6461-2002

Corrosion test of metal coating on the substrate with cathode

Rating of electroplated samples after inspection

38 GB/T 6742-2007 Paint and varnish bending test (cylindrical shaft)

39 GB/T 6743-2008

Acid value of polyester resins for plastics, base paints and varnishes

And determination of total acid value

40 GB/T 6744-2008 Determination of the saponification value of base paints and varnishes by titration

41 GB/T 6749-1997 Paint film color representation method

42 GB/T 6750-2007 Determination of the density of paints and varnishes-Pycnometer method

43 GB/T 6753.1-2007 Determination of the grinding fineness of paints, varnishes and printing inks

44 GB/T 6753.2-1986 Coating surface drying test small glass ball method

45 GB/T 6753.3-1986 Paint storage stability test method

46 GB/T 6753.4-1998 Determination of paint outflow time ISO flow cup method

47 GB/T 6753.6-1986 Large-area brush coating test for coating products

48 GB/T 9264-1988 Determination of the sagging properties of colored paints

49 GB/T 9265-1988 Determination of alkali resistance of architectural coatings

50 GB/T 9266-1988 Determination of scrub resistance of architectural coatings

51 GB/T 9267-2008

White point temperature of emulsions for coatings, coatings, and polymer dispersions for plastics

Determination of temperature and minimum film forming temperature

52 GB/T 9268-2008 Determination of freeze-thaw resistance of latex paint

53 GB/T 9269-1988 Determination of Viscosity of Architectural Coatings by Stormer Viscometer Method

54 GB/T 9271-2008 Paint and varnish standard test board

55 GB/T 9272-2007

Paints and varnishes measure the density of the paint by measuring the dry coating density.

Non-volatile matter volume fraction

56 GB/T 9273-1988 Paint film non-mark test

57 GB/T 9274-1988 Determination of the resistance of paints and varnishes to liquid media

58 GB/T 9275-2008 Buckholz indentation test for paints and varnishes

59 GB/T 9276-1996 Coating natural weather exposure test method

60 GB/T 9278-2008 Temperature and humidity for state conditioning and testing of coating samples

61 GB/T 9279-2007 Paint and varnish scratch test

62 GB/T 9281.1-2008

Transparent liquid Jiashi color grade evaluation color part 1:

Visual method

63 GB/T 9282.1-2008

The color of transparent liquids is evaluated by platinum-cobalt grade. Part 1: Mesh

View method

64 GB/T 9283-2008 Determination of Distillation Range of Solvents for Coatings

65 GB/T 9284-1988

Determination of the softening point of base paints for paints and varnishes

law

66 GB/T 9286-1998 Cross-cut test of paint and varnish film

67 GB/T 9754-2007

Paints and varnishes 20° of paint film without metallic pigments,

Measurement of 60° and 85° specular gloss

68 GB/T 9758.1-7-1988 Paints and varnishes "Soluble" metal content determination

69 GB/T 9722-2006 Chemical Reagent Gas Chromatography General Rules

70 GB/T 9750-1998 Paint product packaging mark

71 GB/T 9751.1-2008

Paints and varnishes use a rotary viscometer to determine the viscosity Part 1

Points: Cone-plate viscometer operating at high shear rate

72 GB/T 9753-2007 Paint and varnish cupping test

73 GB/T 9760-1988

Acid extracts in paints and varnishes in liquid or powdered paints

Preparation

74 GB/T 9761-2008 Visual color comparison of paints and varnishes

75 GB/T 9780-2005 Architectural paint coating stain resistance test method

76 GB/T 10125-1997 artificial atmosphere corrosion test

77 GB/T 10834-2008

Determination of salt water resistance of marine paints. Salt water and hot salt water immersion

Bubble method

78 GB/T 11175-2002 Synthetic resin emulsion test method

79 GB/T 11185-1989 paint film bending test (taper shaft)

80 GB/T 11186.1-1989 Coating Film Color Measurement Method Part One Principle

81 GB/T 11186.2-1989 Method for measuring the color of coating film Part 2 Color measurement

82 GB/T 11186.3-1989 Method for Measuring the Color of Coating Film Part Three Calculation of Color Difference

83 GB/T 12008.3-1989 Method for determination of hydroxyl value in polyether polyol

84 GB/T 12008.5-1989 Method for determination of acid value in polyether polyol

85 GB/T 13448-2006 Color coated steel plate and steel strip test method

86 GB/T 13452.1-1992

Determination of total lead content in paints and varnishes-flame atomic absorption spectrometry

law

87 GB/T 13452.2-2008 Determination of paint film thickness of paints and varnishes

88 GB/T 13452.3-1992

Part of the determination of the hiding power of paints and varnishes: suitable for white and light

Kubelka-Munk method of paint

89 GB/T 13452.4-2008

The filiform corrosion resistance test of the coating film on the steel surface of paint and varnish

Test

90 GB/T 13491-1992 General Rules for Packaging of Coating Products

91 GB/T 13893-2008 Determination of moisture resistance of paints and varnishes by continuous condensation method

92 GB/T 14522-2008

Artificial climate for plastics, coatings and rubber materials for machinery industry products

Accelerated test method

93 GB/T 16259-2008 Artificial climate accelerated weathering test method for building materials

94 GB/T 16777-2008 Test method for building waterproof coating

95 GB/T 16906-1997 Determination of resistivity of static conductive paint for petroleum tanks

96 GB/T18244-2000 Aging test method for building waterproof materials

97 GB/T 18446-2001

Determination of Urethane Prepolymer and Coating Solution by Gas Chromatography

Unreacted toluene diisocyanate (TDI) monomer

98 GB/T 20624.1-2006

Paint and varnish rapid deformation (impact resistance) test No. 1

Part: Drop hammer test (large area punch)

99 GB/T 20624.2-2006 Paint and varnish rapid deformation (impact resistance) test No. 2

Part: Drop hammer test (small area punch)

100 GB/T 21782.7-2008 Powder Coating Part 7: Determination of mass loss during baking

101 HG/T 2409-1992 Determination of isocyanate group content in polyurethane prepolymer

102 HG/T 2458-1993 General Rules for Inspection, Transportation and Storage of Paint Products

103 HG/T 2881-1997 Determination of paint removal efficiency of paint remover

104 HG/T 2882-1997 Drying performance test method of drier

105 HG/T 2997-1979(1997) Method for determination of weight increase of cloth after painting

106 HG/T 2998-1979(1997) Determination of brushability of coating paint

107 HG/T 3000-1979(1997) Method for measuring the increase in tensile strength of masking cloth after painting

108 HG/T 3330-1980 (1985) Test method for the breakdown strength of insulating paint film

109 HG/T 3331-1978

Determination of volume resistivity and surface resistivity of insulating paint film

law

110 HG/T 3335-1977 (1985) Electrophoretic paint conductivity measurement method

111 HG/T 3343-1985 Determination of oil resistance of paint film

112 HG/T 3344-1985 Determination of Water Absorption of Paint Film

113 HG/T 3855-2006 Insulating paint film preparation method

114 HG/T 3856-2006 Insulating paint film water absorption test method

115 HG/T 3857-2006 Determination of oil resistance of insulating paint film

116 HG/T 3858-2006 Thinner, moisture-proofing agent moisture determination method

117 HG/T 3859-2006 Thinner and moisture-proof agent whitening test method

118 HG/T 3860-2006 Thinner, moisture-proof agent volatility determination method

119 HG/T 3861-2006 Thinner, moisture-proof agent gel number determination method

120 JG/T 23-2001 Preparation of coating test panels for architectural coatings

121 JG/T 25-1999 Determination of freeze-thaw cycle resistance of architectural coatings

122 ASTM B 117-2007a Operating Rules for Salt Spray Injectors

123

ASTM B 368-1997(200

3) e1

Copper-accelerated acetic acid salt spray test (CASS test) test

method

124

ASTM D 522-1993a(20

08)

Test method for bending of mandrel with organic coating

125 ASTM D523-2008 Specular gloss test method

126

ASTM D 562-2001(200

5)

Determination of paint viscosity with Stormer viscometer

127 ASTM D 610-2008 Test Method for Evaluating the Degree of Rust on Painted Steel Surface

128 ASTM D 714-2002el Test Method for Evaluating the Foaming Procedure of Paints

129

ASTM D 1005-1995(20

07)

Determination of dry film thickness of organic coating

130 ASTM D 1186-2001

Measurement of dry film thickness of non-magnetic organic coating on magnetic substrate

set

131 ASTM D 1209-2005 Color of transparent liquid (platinum cobalt method)

132 ASTM D 1210-2005 Pigment-paint system dispersion fineness

133

ASTM D 1308-2002(20

07)

The influence of household chemicals on varnishes and colored organic topcoats

134 ASTM D 1400-2000

Paints, varnishes, spray paints and related materials on non-magnetic metal substrates

Determination of the dry film thickness of non-metallic coatings of products

135

ASTM D1475-1998(2008

)

Test method for density of liquid paint, ink and related products

136 ASTM D

1654-2008 Test method for evaluating painted or coated samples in corrosive environment

137 ASTM D 1735-2004 Coating Water Spray Test

138

ASTM D2243-1995(2008

)

Test method for freeze-thaw resistance of water-soluble coatings

139 ASTM D 2244-2007 Instrumental Evaluation of Color Difference of Opaque Materials

140 ASTM D 2247-2002 Painted metal test panel at 100% relative humidity

141 ASTM D 2369-2007 Volatile Matter of Coatings

142 ASTM D 2454-2008 Determination of the effect of overbake on organic coatings

143 ASTM D 2486-2006 Test Method for Washing Resistance of Wall Coatings

144

ASTM D 2832-1992(20

05)

Recommended practice standards for the determination of non-volatile content of paints and paint materials

145

ASTM D 2794-1993(20

04)

Organic coating resistance to rapid deformation (impact) test

146

ASTM D3170-2003(2007

)

Coating shatter resistance

147

ASTM D 3278-1996(20

04) e1

Closed Cup Method to Determine the Flash Point of Liquid

148

ASTM D 3335-1985a(2

005)

Determination of Trace Lead, Cadmium and Cobalt in Paint by Atomic Absorption Spectrometer

149 ASTM D 3363-2005 Use pencil test to determine the hardness of paint film

150 ASTM D 3792-2005 Gas Chromatography Method for Measuring Water Content of Water-reducible Paint

151 ASTM D 4060-2007

Standard Test for Determining the Wear Resistance of Organic Coatings with Taberr Abrasion Tester

Test method

152

ASTM D 4145-1983(20

02)

Sheet bending test (T bend)

153

ASTM D 4212-1999(20

05)

Measuring viscosity with an immersion viscosity cup

154

ASTM D 4213-1996(20

03)

Test method for determining wet abrasion resistance of indoor coatings

155 ASTM D4213-2008 Test Method for Determining the Scrub Resistance of Coatings by Abrasion Reduction Method

156

ASTM D 4287-2000(20

05)

Determination of high shear viscosity with cone and plate viscometer

157 ASTM D 4541-2002

Use a portable adhesion tester to measure the pull-off strength of the coating

Test method

158 ASTM D 4587-2005

Fluorescence ultraviolet (UV)-condensation exposure test of paint and related coatings

Test method

159

ASTM D4747-2002(2008

)

Test for the determination of unreacted monomer content in latex by gas-liquid chromatography

Test method

160 ASTM D 4752-2003 Solvent resistant MEK wipe

161

ASTM D 4827-2003 Determination of Residual Monomer Content in (Styrene Acrylic) Emulsion by Fine Column Chromatography

162

163 ASTM D 5402-2006 Evaluation of the resistance to solvent rubbing of organic coatings

164 ASTM E 376-2006 Determination of coating thickness by magnetic field method or eddy current method (electric field method)

165 ASTM G 154-2006

Light exposure equipment for UV exposure test of non-metallic materials (fluorescence

Type) method of operation

166 ASTM G 155-2005a

Non-metallic materials with water and non-aqueous light exposure equipment (xenon arc

Type) operation

167 BS EN 1670-2007 Building hardware. Corrosion resistance. Requirements and test methods

168

DIN EN ISO 2813:19

99

Paints and varnishes-20° of paint film without metallic pigments,

60°, 85° specular gloss measurement

169

DIN EN ISO 2409-20

07

Paint and varnish cross-cut test

170

DIN EN ISO 20567-1

-2007

Paints and varnishes-coating stone impact resistance test

171 GM4298P-1997 Salt spray test

172 GM4465P-1995 Water mist humidity test

173 GM9133P-1999 resistant to water spots, coating damage, salt stains and fading

174 GM9141P-2003 Compatibility of vinyl material and leather

175 GM9500P-1988 Gasoline accumulation test in gasoline filling area

176 GM9501P-1997 Gasoline immersion test of painted parts

177 GM9505P-2005 automotive environmental cycle test

178 GM9506P-1988 Test for determination of coating adhesion and brittleness

179 GM9507P-1988 Nail hardness test of painted parts

180 GM9509P-1995 Determine the solvent friction method for the curing of painted metal or plastic substrates

181 GM9511P-1998 Crack pitting corrosion reverse creep test

182 GM9518P-1988 Determination of coating thickness of flexible coated plastic parts

183 GM9502P-1988 Knife cross-cut adhesion test procedure for spraying elastic plastic substrate

184 GM9503P-1998

Brittleness test of painted plastic and sealant through a mandrel

test

185 GM9900P-2002

Under normal customer use conditions, the auto parts have the cleaning agent/

Solvent durability

186 GME00202-2007 S-CAR Scraper/Scraper Surface Spraying Requirements (Supplement)

187 GME60292-2000 Test method for determination of color fastness by artificial light

188 GME60403-1979 Fuel soot test for resistance to discoloration of organic coatings

189 GMW14700-2007 Coating stone impact resistance

190 GMW14829-2006 Paint finish tape adhesion test

191 GMW15282-2006 Corrosion reverse creep test

192 ISO 1520-2006 Paint and varnish cupping test

193 ISO 2409:2007 Cross-cut test for paints and varnishes

194 ISO 4624-2002 Drag test of paint and varnish adhesion

195 ISO 4628-1:2003

Paint and varnish paint film degradation assessment defect degree, amount

Provisions for Value and Size and Degree of Uniform Change in Appearance Part 1

Points: general principles and identification system

196 ISO 4628-2:2003

The degree of defects and the magnitude of the degradation of paint film of colored paints and varnishes

Regulations on the degree of uniform change in size and appearance Part 2:

Foaming grade regulations

197 ISO 4628-3:2003

The degree of defects and the magnitude of the degradation of paint film of colored paints and varnishes

Regulations on the degree of uniform change in size and appearance Part 3:

Rules for rust level

198 ISO 4628-8:2005

The degree of defects and the magnitude of the degradation of paint film of colored paints and varnishes

Regulations for uniform changes in size and appearance Part 8:

Evaluation of reticle peeling and corrosion

199 ISO 4628-10:2003

The degree of defects and the magnitude of the degradation of paint film of colored paints and varnishes

Regulations on the degree of uniform change in size and appearance Part 10:

Evaluation of linear corrosion grade

200 ISO 6270-1:1998

Paints and varnishes. Determination of moisture resistance. Part 1: Continuous cooling

Coagulation

201 ISO 6270-2:2005

Paints and varnishes. Determination of moisture resistance. Part 2: Condensate

Test procedure for samples in the atmosphere

202 ISO 6272-1:2002 Paints and varnishes-Drop weight test

203 ISO 6272-2:2002 Paints and varnishes-Drop weight test

204 ISO 7724-1-3:1984 Colorimetric method for paints and varnishes

205 ISO 7784-2:1997

Paints and varnishes-Determination of abrasion resistance-Part 2: Rotating rubber

Grinding wheel method

206 ISO 8130-7:1992 Determination of mass loss of powder coatings during baking

207 ISO 9227:2006 Corrosion test in man-made environment

208 ISO 10283:2007 Isocyanate monomer content in polyurethane

209 ISO 11507:2007 Coatings are artificially aged in equipment, UV fluorescence and water aging

210 ISO 11890-2:2006

Paints and varnishes-determination of volatile organic compounds (VOC) content Part 2

Part: Gas Chromatography

211 ISO 13885-1:2008

Binder gel permeation chromatography for paints and varnishes

(GPC) Part 1: Use tetrahydrofuran as eluent

212 ISO 17895:2005(E) Paints and varnishes—Determination of organic volatile matter in low VOC latex paints

213 ISO 16805:2003 Paint bases for paints and varnishes—Determination of glass transition temperature

214 ISO 20567-1:2005

Determination of stone chip resistance of paint and varnish coatings Part 1

Points: multiple impact test

215 JIS K5600-1-8-1999 General test method for coating film

216 JIS K5600-1-2-2002

General Test Methods for Coatings-Part 1: General Rules-Section 2:

sampling

217 JIS K5600-1-4-2004

General Test Methods for Coatings-Part 1: General Rules-Section 4:

Standard template for test

218

JIS K5600-6-3 AMD.1

-2006

General test methods for coatings-Part 6: Chemical properties of paint film-

Section 3: Heat resistance

219 JIS K5600-7-6-2002

General test methods for coatings-Part 7: Film durability-Part

Section 6: Weather resistance (open-air method)

220 JIS K5600-7-7-2008

General test methods for coatings-Part 7: Film durability-Part

Section 7: Enhanced weather resistance (xenon lamp method)

221 JIS K5600-7-9-2006

General test methods for coatings. Part 7: Long-term durability of coatings

Section 9: Cyclic Corrosion Test Method-Salt Water Spray/

Dry/wet

222 JIS K5600-8-2-2008

General test methods for paints-Part 8: Evaluation of paint film peeling

－Section 2: Degree of Foaming

223 JIS K5600-8-3-2008

General test methods for paints-Part 8: Evaluation of paint film peeling

－Section 3: Degree of Oxidation

224 JIS Z2371-2000 Salt spray test method

225 PV1200-1987 Climate change test

226 PV1210-2001 Alternating corrosion test

227 PV2005-2000 Climate change test

228 SAE J400-2002 Coating Stone Impact Resistance Test

229 SAE J1885-2005

Use water-cooled controllable xenon arc radiation device to make car interior decoration

Accelerated aging of components

230 SAE J1960-2004

Use water-cooled controllable xenon arc radiation device to make automobile exterior materials

Accelerate exposure to aging

231 GA/T 298-2001 Road marking paint

232 GB 5237.3-2008 Aluminum alloy architectural profiles Part 3 Electrophoretic painted profiles

233 GB 5237.4-2008 Aluminum alloy building profiles Part 4 Powder coating profiles

234 GB 5237.5-2008 Aluminum alloy building profiles Part 5 Fluorocarbon paint spraying profiles

235 GB/T 6745-2008 ship hull paint

236 GB/T 6746-2008 Marine oil tank paint

237 GB/T 6747-2008 Marine shop primer

238 GB/T 6748-2008 Marine antirust paint

239 GB/T 6822-2007 Ship hull antifouling and antirust paint system

240 GB/T 6823-2008 ship ballast tank paint

241 GB/T 6890-2000 zinc powder

242 GB 8771-2007 Hygienic standard for lead content in pencil paint

243 GB/T 9261-1988 deck paint

244 GB/T 9262-2008 Marine cargo hold paint

245 GB/T 9755-2001 Synthetic resin emulsion exterior wall paint

246 GB/T 9756-2001 Synthetic resin emulsion interior wall paint

247 GB/T 9757-2001 solvent-based exterior wall paint

248 GB/T 9779-2005 Multilayer architectural coating

249 GB/T 12754-2006 Color coated steel plate and steel strip

250 GB/T 13492-1992 Various color automotive topcoats

251 GB/T 13493-1992 Automotive primer

252 GB/T 14616-1993 Engine room bilge coating

253 GB 14907-2002 Steel structure fireproof coating

254 GB 18581-2001

Harmful substances in solvent-based wood coatings for interior decoration materials

Quality limit

255 GB 18582-2008 Limits of harmful substances in interior decoration materials and interior wall coatings

256 GB/T 19250-2003 polyurethane waterproof coating

257 GB/T 20623-2006 Emulsion for architectural coatings

258 GB/T 21089.1-2007