Battery EN62133 test

Introduction

In March 2013, CENELEC, the European Committee for Electrotechnical Standardization, officially released the EN 62133: 2013 version of the battery safety standard. This standard mainly addresses the safety requirements of single batteries and battery packs containing alkaline or non-acid electrolytes and portable sealed single batteries and battery packs. The new standard will replace the first edition of EN62133:2003 issued in 2003. At the same time, the European Committee for Electrotechnical Standardization also specified the expiration date of the old version of EN 62133. According to the requirements, the EN 62133: 2003 version will be officially withdrawn on January 10, 2016. The full test reminds major battery manufacturers and battery product manufacturers to pay attention to the introduction of the new version of EN 62133:2013 as soon as possible, so as not to affect the future export of battery products to the European region.

Electrical products entering the EU (such as mobile phones, tablets, electric toys, power tools, etc.) need to meet the requirements of the EU's new method directives and affix the CE mark. As an accessory of many terminal products (such as mobile phones, electric toys, tablet computers, etc.), the safety of batteries needs to be considered in conjunction with these terminal products. Therefore, many terminal product customers require the best parts and components for their own product safety considerations. Haoyi also affixed the CE mark, so that its products better meet the requirements of relevant directives. Therefore, if the battery products of an export company can meet the requirements of EN62133 standard and affix the CE mark, it will enhance the competitiveness of its products in the market and strive for a larger market for the company. EN62133 product range: portable sealed secondary battery cells and batteries (groups) containing alkaline or non-acid electrolytes.

EN62133 cell and battery test items:

Cell: Continuous low-rate charging, vibration, temperature cycling, external short circuit, drop, shock (collision), thermal misuse (thermal shock), extrusion, low air pressure, overcharge, forced discharge, high rate charging protection Function (lithium system), labeling and packaging, incorrect installation (nickel system).

Battery: Vibration, shell stress at high temperature, temperature cycling, external short circuit, drop, impact (collision), labeling and packaging, overcharge (nickel system).

Scope of use: safety requirements for rechargeable batteries and battery packs, alkaline or other non-acid electrolytes\sealed portable batteries.

Test items: continuous low rate charging, vibration, high temperature mold shell stress, high and low temperature cycling, reverse charging (nickel battery), external short circuit, free fall, mechanical shock, heat abuse, extrusion, low voltage, overcharge (nickel battery, lithium battery) Different) Forced discharge, high rate charging.

Battery standard similar to EN62133

IEC/ EN 62133 (portable sealed secondary cell and battery)

IEEE 1625 (rechargeable batteries for portable computers)

IEEE 1725 (rechargeable batteries for mobile phones)

IEC/ EN 60086-1, 60086-2, 60086-3 (disposable batteries)

IEC/ EN 60896-21&-22 (fixed valve-regulated lead-acid battery)

IEC/ EN 61056-1&-2 (portable valve-regulated lead-acid battery)

IEC/ EN 61951-1 (Ni-Cd battery)

IEC/ EN 61951-2 (Ni-MH battery)

IEC/ EN 61959IEC/ EN 61851-1&-21&-22IEC/ EN 62196IEC/ EN 60950 (IT product testing)

IEC/ EN 61960 (portable rechargeable batteries and lithium batteries)

IEC/ EN 62282 (fuel cell)